![]() |
|
Tel +44(0)1226 766122, Mobile +44(0)7766 383634 |
|
| Programmable NMEA Filter/Processor PCB With RS232 compatibility, sentence filtering, NMEA processing and blocking options. This is slighly simpler in condtruction and operaton to the RS422 version Function.The NMEA Processor accepts NMEA data, processes the data to a customer defined set of rules and then delivers the output in NMEA format.If you can define the function we can probably write a program to perform the operation and it won't cost a fortune!Note you will deal with the same person from start to finish on the project. Some Real Examples Land of Hope and Glory. A piece of surveying equipment could not be utilised to its full potential because it accepted only NMEA version 1.5 making it incompatible with a modern DGPS only offering NMEA version 2.3. The solution was a Filter/Processor with firmware to convert the NMEA sentence to the exact requirements of the survey equipment. Wind of Change. A ship's anemometer had a NMEA output connected to the ship's fuel management computer but for some reason it worked intermittently. It was determined that at a wind speed of less than 10 knots the NMEA sentences had non conforming 'spaces' in them. The manufacturer had long since stopped supporting the anemometer so a filter was used with firmware designed to remove the spaces and re-transmit the data avoiding the need to replace an otherwise perfectly functional instrument. |
Downloads |
|
RS232 NMEA Filter/Processor PCB |
|
|
Links |
|
|
As a Programmable Filter. All I really want is ...The NMEA Filter firmware provides a simple user programmable unit for 'grabbing' and passing a single specific NMEA sentence, effectively reducing information overload which can cause lock-up of older marine electronic equipment. The programming information is retained in memory. And it doesn't stop there! Flexibility Recognising that a lot of potential applications may be unique the software can be factory modified to a set of rules to provide manipulation of the NMEA format output to meet individual situations. We offer full support to meet your requirements. An 'on site' service is also available. The Concept of the Processor together with the flexibility of Eiland Communications is somewhat universal. It can be designed to work at different baud rates, indeed it need not be NMEA or even a conventional baud rate. For
further information or if you are looking for something similar please
contact:-Eiland
Communciations Limited
January 13th, 2010 23:22:32 |
|